Mikrooświetlenie do szafek i gablot: wycięcie, wiązka i odstępy

A micro downlight is a tiny-aperture head for shelves, cabinets, and display volumes — not a scaled-down lobby ambient fixture.

Use this page when you need cut-out, beam, and spacing for cabinet or case work.

Skip it if you need a general mini ceiling downlight, a shallow-void ceiling pack, or a large high-ceiling head — those are separate jobs (mini / shallow unwritten; large-downlight draft — not linked until live).

If recessed vs surface vs adjustable for the room ceiling is still open, start here:

→ Metody montażu oświetlenia LED Downlight: wpuszczane, natynkowe i regulowane

W skrócie: Lock micro downlight cut-out size and driver location first, pick micro downlight beam angle for the shelf depth, then space from the lit plane — not from a ceiling-grid rule of thumb.

When micro belongs in the brief

A compact micro downlight application fits millwork, niches, and vitrines where a standard recessed head looks oversized and overheats the task.

A cabinet lighting micro fixture lights the work plane or merchandise inside the box — glare to the standing viewer is a fail even if lux looks fine on paper.

A display case micro downlight must also respect heat, UV/blue concerns for sensitive goods, and service access through the case lid or plenum.

🎯 When should you specify a micro downlight?
When the lit volume is a cabinet, shelf, or case — and a normal ceiling aperture would dominate the joinery.

Cut-out and trim (millimetres matter)

Write the micro downlight cut-out size on the millwork drawing with tolerance — cabinet doors and glass lids punish “close enough.”

Many packs use a mini aperture recessed trim language for the visible opening; confirm whether that dimension is cut-out or bezel.

Remote drivers are common: reserve cavity and cable path before the carpenter closes the box.

Sprawdzać	Pass	Fail
Wyłącznik	Exact Ø / L×W + tolerance	“Small hole” on the quote
Trim / bezel	Matches finish schedule	Mixed colours on one run
Kierowca	Named location + access	Encased with no service path

Beam angle before spacing

micro downlight beam angle is chosen for shelf depth and object height — a wide flood inside a shallow case washes the glass and the viewer’s eyes.

Narrower beams pick merchandise; wider beams even a long shelf only if centres and aim allow it.

A micro led downlight with high package lumens still fails if the beam hits polished stone or mirror backs unchecked.

Bars for shelf accent density, display-case evenness, wide-beam wash risk, and tight cut-out tolerance.

Nacisk na planowanie (względny)
Shelf accent — tighter centres / narrower beam
Display-case evenness — overlap on the deck
Wide beam in shallow case — glare risk
Cut-out tolerance — millwork critical

Spacing inside the cabinet or case

Treat this as a micro downlight spacing guide for the lit plane (shelf or deck), not the room ceiling height.

Sequence:

1. Lock mounting height inside the volume to the merchandise plane.
2. Pull useful beam width at that plane from the SKU plot (or a mock-up).
3. Set centres so pools meet your evenness goal without glass flare.
4. Aim once with sample goods before the run is glued shut.

Illustrative first pass (replace with twój optic): shelf depth 350 mm, head 80 mm above deck, medium beam — start near 250–350 mm centres, then adjust for hot spots and viewer glare. This is a method sketch, not a joinery code.

🎯 How far apart should micro downlights be in a cabinet?
As far as the beam still covers the shelf evenly without flaring the glass — prove it on a mock-up, not a ceiling-grid slogan.

Spec checklist before millwork closes

1. Confirm the job is cabinet / display — not a mini ceiling ambient substitute.
2. Freeze cut-out, trim finish, and driver access on the joinery drawing.
3. Attach beam evidence for the exact micro led downlight code.
4. Write centres and aim notes for the shelf or case deck.
5. Check heat near timber, acrylic, and sensitive goods.
6. Reject quotes that only say “small LED” with no cut-out or beam data.

Co robić dalej

1. If the room ceiling mount path is still open, use the installation methods overview linked in the intro.
2. Keep mini-ceiling, shallow-void, and large high-ceiling decisions on their own guides.
3. Put cut-out, beam, and centres on the millwork RCP before procurement.
4. Mock up one bay with real finishes before volume cut-outs.
5. Prefer suppliers that publish micro cut-out drawings and beam data for commercial millwork — XHLUX can support compact micro families on suitable codes; still verify each file against the shipped model.

Notatki i źródła

• Spacing example (250–350 mm centres) is an illustrative first pass for a shallow shelf geometry — always re-check with the SKU beam and a physical mock-up.
• Live companion: installation methods overview.
• Dokładny Serper PAA dla tej puli słów kluczowych jest pusty; brak sekcji FAQ.