Guides techniques

Comparaison des spots encastrés LED et halogènes au plafond : puissance, dégagement de chaleur, variation d’intensité et exemple de facture d’électricité détaillé pour maîtriser votre consommation énergétique avant de remplacer tout un ensemble de luminaires.

After you skip the cut-out for a surface-mounted downlight: check Ta, heat path, listed enclosure, driver location, and ceiling clearance before you order.

Five surface-mount LED downlight form factors for ceilings that cannot be recessed: disc, cylinder, COB, spacing rules, and multi-head adjustable. When to pick each one.

Decide when DIY ceiling LED downlight work stops and a licensed electrician must take over — cutout, retrofit kits, mains wiring, permits, and a safe freeze checklist.

Before you order downlights, freeze these six specs against your ceiling: cutout diameter, recess depth, IP rating, weight and support, trim type, and IC/fire rating. A pre-order checklist for contractors and specifiers.

Canless vs can recessed downlights: void depth, housing, install path, and when listing and fire ratings decide which recessed path you freeze.

What up-down LED wall lights are, where to use indoor and outdoor fixtures, and how ambient up-down lighting differs from ceiling downlights.

When to use a wall washer downlight: wall-wash technique vs flood or accent spots, and when a gallery or feature wall needs that fixture type.

What surface-mounted COB lights are, when a surface mount fixture beats recessed, and how beam concentration and heat dissipation decide the job before you freeze the SKU.

Spot encastré vs projecteur : la terminologie exacte, la différence d'angle de faisceau et quand choisir un éclairage d'ambiance, un éclairage d'accentuation ou une tête de spot encastrée/pot réglable.

How to choose wash vs graze, then set wall wash beam angle, setback, and fixture spacing for even feature walls and façades.

Spots encastrés LED orientables : mécanismes à cardan, plage d’inclinaison, éclairage mural et d’accentuation. Angle de faisceau et recommandations d’installation pour les projets commerciaux.