XHLUX
A dali magnetic track light is not a magnetically mounted lamp with a DALI sticker. It is a system where 48V track power, DALI-capable control gear, a powered DALI bus and a controller work together so each compatible module can be addressed, grouped and scene-controlled.
This guide stays on that join: how DALI magnetic track lighting is powered, wired and commissioned on a 48V magnetic track—not a catalogue tour of every magnetic head, and not a full DALI protocol encyclopedia.
TL;DR
- Magnetic mounting alone does not create DALI control.
- 48V track power and DALI bus power are separate electrical jobs.
- Four-conductor tracks (for example Topsund M20) are one architecture—not the only one.
- Confirm DT6 vs DT8 (and colour type) on the actual driver, not the marketing label.
- Spec track voltage, conductors, drivers, bus power and certification together before you order.
Table des matières
- 1. What Is a DALI Magnetic Track Light?
- 2. How Does DALI Magnetic Track Lighting Work?
- 3. How Are 48V Power and DALI Control Signals Connected in Magnetic Track Systems?
- 4. Where Is the DALI Driver Located in a Magnetic Track System?
- 5. What Is the Difference Between DALI DT6 and DT8 Magnetic Track Lights?
- 6. Does a DALI Magnetic Track System Need a Separate Bus Power Supply?
- 7. How Are DALI Magnetic Track Lights Addressed, Grouped and Controlled?
- 8. What Does DALI-2 Certification Mean for Magnetic Track Lighting?
- 9. How Do You Install and Wire a DALI Magnetic Track Lighting System?
- 10. How Do You Commission and Troubleshoot DALI Magnetic Track Lights?
- 11. How Does DALI Magnetic Track Lighting Improve Commercial Lighting Control?
- 12. What Should You Check Before Specifying DALI Magnetic Track Lights?
🔌 1. What Is a DALI Magnetic Track Light?
1.1 What Is DALI Lighting Control?
DALI (Digital Addressable Lighting Interface) is a digital lighting-control protocol. Compatible application controllers send standardised commands to control gear—typically LED drivers—so dimming, grouping and scenes are handled digitally rather than by simple switched mains or analogue 0–10 V alone.
1.2 What Makes a Magnetic Track Light DALI-Compatible?
The magnetic track holds and feeds the module. DALI capability lives in the control gear and how that gear joins the DALI bus. A head that snaps onto a 48V rail without a DALI interface is still only a powered magnetic module.
Both the luminaire/driver package and the track/control architecture must be specified for DALI. Treating “magnetic” as “smart” is how projects buy the wrong SKU.
1.3 What Are the Main Components of a DALI Magnetic Track System?
A working system usually includes:
- a 48V DC power supply for the track load
- the magnetic track
- DALI-compatible LED drivers (in-module, in-track or product-specific)
- magnetic light modules
- DALI bus power (standalone or integrated in a controller)
- a DALI application controller (and optional gateways)
Wiring details for those parts belong in later sections—not here.
🎯 What makes a magnetic track light DALI-compatible?
Compatible DALI control gear plus a valid bus and controller path—not magnetic mounting alone.
⚙️ 2. How Does DALI Magnetic Track Lighting Work?
2.1 How Does the 48V Power Supply Work?
The system supply converts AC mains to 48V DC for the track. That feed powers compatible track electronics and drivers. It is not the same as the driver’s constant-current LED output: the driver still regulates LED current after it takes its DC input.
2.2 How Does the DALI Controller Communicate with LED Drivers?
The controller places digital commands on the DALI bus. Compatible control gear listens, answers queries and adjusts output according to the parts it implements (for example LED level control or colour control). The controller is the brain; the driver executes.
2.3 How Do Power and Control Work Together?
48V keeps modules alive. The DALI bus carries commands. The controller does not replace the LED operating power: it tells DALI gear how hard to drive the LEDs. How those two circuits share a track body—or stay separate—depends on the manufacturer architecture covered next.
🎯 How do power and digital control work together in a DALI magnetic track system?
48V feeds the track load; the DALI bus carries commands to drivers that regulate LED output.
🔗 3. How Are 48V Power and DALI Control Signals Connected in Magnetic Track Systems?
Three common patterns appear in product documentation. They are not interchangeable without that maker’s diagram.
| System structure | 48V power | DALI control |
|---|---|---|
| Four-conductor track | Track conductors | Track conductors |
| External DALI wiring | Track power conductors | Separate wiring / feed contacts |
| Integrated driver module | Product-specific connection | Product-specific connection |
3.1 Four-Conductor Track with Separate Power and DALI Bus Connections
Sur les Topsund’s M20 DALI-2 magnetic track documentation for DALI-based configurations, two conductors carry 48V DC and two carry the DALI bus inside the same four-wire track. That is a Topsund M20 architecture—not a claim that every magnetic track is four-wire DALI.
Topsund also states that its SD-10048 48V supply feeds the track and can pass DALI signals through to the track’s DALI pair, but does not generate DALI bus power.
3.2 Magnetic Track Systems with External DALI Wiring
Some families keep 48V on the track conductors while DALI arrives through dedicated feed wires or terminals. Maytoni’s Exility English installation manual, for example, shows DALI bus wires landing on the yellow and green power-input conductors while 48V uses its own polarity-marked pair—and warns that certain recessed supply SKUs (TRX034DR4-100 / TRX034DR4-200 on that sheet) lack DALI contacts, so DALI luminaires need the DALI-capable remote supply listed there.
3.3 Magnetic Track Systems with Integrated DALI Driver Modules
Other builds route 48V power and DALI bus connections into an integrated driver or light module through that product’s adapter and contact set. The electrical path is still product-specific: power and DA/DA may share a module connector without implying a universal four-conductor track. Driver ratings and physical packaging belong with driver placement (Section 4), not with this connection architecture.
Conceptual architecture showing separate 48V lighting power and DALI bus functions. Actual conductor arrangements and polarity requirements depend on the manufacturer. Sharing a track extrusion does not merge the two supplies into one function.
🎯 How can a magnetic track carry both 48V power and DALI control signals?
Only when that product’s conductor map or external DALI feed is designed for it—confirm the sheet, do not assume a universal four-wire rule.
📍 4. Where Is the DALI Driver Located in a Magnetic Track System?
Keep three labels distinct:
- 48V DC Power Supply — supplies DC power to the compatible magnetic track lighting system.
- DALI LED Control Gear — receives DALI commands and regulates the electrical output to the LED load.
- Emplacement du driver — the physical place where that LED control gear is installed.
These are not interchangeable concepts. A remote 48V PSU is not proof of a remote DALI LED driver.
4.1 How Do Integrated DALI Drivers Work Inside Magnetic Track Light Modules?
Many heads integrate slim DALI control gear in the module. Sunricher’s magnet-track DT6 SRP-2305-MT-48VCC100-700 product page specifies 48V DC input, a single constant-current channel selectable 100–700 mA, maximum about 28 W, a DALI-2 interface under IEC 62386-207, and a compact magnet-mount form factor. Those figures belong to that SKU—not to every integrated magnetic-track driver.
4.2 Where Can DALI Control Gear Be Installed in a Magnetic Track System?
Possible locations are system-dependent:
- Luminaire-integrated — control gear travels with the magnetic module (as in the Sunricher magnet-track DT6 example above).
- Track-integrated — only where a manufacturer’s product documentation shows DALI LED control gear (or a DALI-capable in-track supply with the required contacts) installed in the rail. Do not assume every magnetic track offers in-track DALI gear.
- Remote — where the product architecture supports remote DALI control gear. A remotely installed 48V power supply alone does not demonstrate remote DALI LED control gear.
4.3 How Does Driver Placement Affect Luminaire Design and Maintenance?
Luminaire-integrated gear affects module length, thermal design and how the head is replaced. Track-integrated or remote placements change wiring length and service access; access requirements follow that family’s drawings—do not assume every in-track installation needs an access panel. Spec the location before the ceiling finish freezes maintenance paths.
| Composant | Main function | Possible location |
|---|---|---|
| 48V DC Power Supply | Supplies DC power to the compatible track lighting system | Remote or another manufacturer-approved installation position |
| DALI LED Control Gear | Receives DALI commands and regulates LED output | Luminaire-integrated, track-integrated or remote, where supported by the specific product |
| DALI Bus Power Supply | Supplies power to the DALI communication bus | Standalone or integrated into compatible equipment |
🎯 How does the physical location of a DALI driver affect a magnetic track lighting system?
It changes size, heat, access and which contacts must carry 48V and DA/DA—confirm the product’s placement, not a generic label.
🎛️ 5. What Is the Difference Between DALI DT6 and DT8 Magnetic Track Lights?
Per the DALI Alliance device-types note, DT numbers map to IEC 62386 Parts for control gear: DT6 = Part 207 (LED control), DT8 = Part 209 (colour control gear). Gear can implement more than one Part.
5.1 How Does DALI DT6 Control LED Brightness?
DT6 gear uses a short address to control a LED output level along the standardised dimming curve. Fixed-CCT magnetic track heads commonly use DT6 when only intensity control is required.
5.2 How Does DALI DT8 Control LED Colour?
DT8 adds colour-control features defined in Part 209. Tunable White via Tc is one colour type—not the only one. RGB and other colour types exist in the standard family; the driver’s declared colour type must match the project. Topsund’s M20 DALI material cites DT8 (Tc) Tunable White ranges on compatible luminaires as a project option—again, that brand’s offer, not every DT8 SKU.
5.3 Can One DALI Driver Support Both DT6 and DT8?
Yes. The Alliance notes that colour-capable LED drivers may implement Parts 207 and 209 together, or Part 209 with the required base Parts. Product labels are shortcuts; the datasheet’s implemented Parts decide the truth. Sunricher’s DT8 magnet-track pages cite Part 209 (and some ultra-slim variants also list Part 207 Ed. 2 alongside 209).
| Comparaison | DT6 | DT8 |
|---|---|---|
| IEC 62386 | Part 207 | Part 209 |
| Main function | LED control | Colour control |
| Brightness control | Oui | Yes, alongside supported colour-control functions |
| Colour control | Not provided by DT6 alone | Per implemented colour type |
| Application typique | Fixed-CCT dimming | Tunable White / other colour apps |
| Adressage | Single output control | Multiple colour outputs on one short address (when designed so) |
🎯 Can a DALI magnetic track light control both brightness and colour temperature?
Only when the driver implements the needed Part 209 colour type (for example Tc) and the controller supports it—DT8 is not automatically Tunable White.
🔋 6. Does a DALI Magnetic Track System Need a Separate Bus Power Supply?
6.1 What Is DALI Bus Power?
DALI bus devices need a compliant bus supply. Conventionally, designers treat the bus as a low-voltage communications rail on the order of about 16 V with a current budget often discussed up to 250 mA for a standard line—always confirm the controller, bus supply and local design rules for the project.
6.2 Is the 48V Power Supply Also the DALI Bus Power Supply?
No by default. 48V feeds luminaires; bus power feeds the DALI line. Topsund’s M20 DALI documentation is explicit: the SD-10048 provides 48V track power and can pass DALI signals, but does not provide DALI bus power.
6.3 Can DALI Bus Power Be Integrated into Another Device?
A DALI bus requires a compliant power source, but that does not necessarily mean a separate physical power supply unit. Bus power may come from a standalone supply or from an appropriate integrated bus power supply within compatible control devices or control gear. The selected configuration must meet the bus voltage and current requirements, and the complete bus power budget must be checked. One physical product may combine more than one function where its specifications explicitly support that configuration—still keep 48V lighting power, DALI bus power and the application controller’s command role distinct on paper.
6.4 What Happens If the DALI Bus Has Insufficient Power?
Devices drop offline, discovery fails or responses become unstable. Add up device bus consumption, leave margin and split lines when the budget is exceeded.
| Article | 48V power supply | DALI bus power |
|---|---|---|
| Main function | Power the lighting system | Supply the DALI bus |
| Flux lumineux | 48V DC in the systems discussed here | Typically around 16 V class |
| Connected equipment | Track and compatible drivers | DALI bus devices |
| Capacity | Lighting load | Bus current demand |
| Configuration | System-specific | Standalone or integrated |
🎯 Where does the DALI bus get its power?
From a compliant bus power supply—either standalone or integrated into compatible equipment—not automatically from the 48V track PSU.
🏷️ 7. How Are DALI Magnetic Track Lights Addressed, Grouped and Controlled?
7.1 What Is a DALI Short Address?
Control gear receives a short address so the controller can talk to one device. Without addressing, you only have broadcast-style behaviour, not true individual control.
7.2 How Are Magnetic Track Lights Assigned to Groups?
Multiple addressed gears can join a group so one command moves a set of heads—useful for a display bay or corridor run.
7.3 How Do DALI Scenes Control Multiple Lighting Groups?
Scenes store preset levels (and colour parameters where DT8 colour types apply). Retail and showroom projects often recall scenes for open / feature / close modes without rewiring.
7.4 How Many DALI Devices Can Be Controlled on One Bus?
A DALI-2 subnet provides up to 64 short addresses for control gear and 64 for control devices. These are separate address spaces, not a guarantee that any combination of 128 physical devices will be supported. Some physical devices may use multiple logical addresses, and the actual system capacity also depends on bus power, addressing requirements, controller capabilities and the system configuration.
DALI luminaires share a bus, receive individual short addresses, can belong to multiple groups, and store scene settings that are recalled by the controller.
🎯 Can every DALI magnetic track light be controlled individually?
Yes when each gear has a short address on a working bus; groups and scenes are optional layers on top.
✅ 8. What Does DALI-2 Certification Mean for Magnetic Track Lighting?
8.1 What Is DALI-2 Certification?
DALI-2 certification is an IEC 62386-based programme with independent testing under the DALI Alliance. A marketing claim of “DALI compatible” is not the same as a verified certificate for a defined product version.
8.2 How Does DALI-2 Differ from Earlier DALI Products?
DALI-2 expands tested product categories and interoperability expectations for control gear and control devices. Spec sheets should name the certified product and relevant Parts—not only the word “DALI”.
8.3 Can DALI and DALI-2 Devices Work Together?
Backward-compatible behaviour exists in many supported mixes, but feature sets differ. Never assume every older gear supports every DALI-2 feature or that certification equals universal mix-and-match.
| Vérifier | Older / unverified “DALI” claim | DALI-2 certification path |
|---|---|---|
| Basis | Manufacturer statement | IEC 62386 + Alliance programme |
| Essais | Often self-declared | Independent verification for the listed product |
| Spec use | Verify Parts and firmware | Prefer certificate + datasheet Parts list |
| Interop assumption | Unsafe to assume | Still check device categories and features |
🎯 Why should buyers check DALI-2 certification when specifying magnetic track lights?
Certification verifies a defined product version—compatibility claims alone are not the same proof.
🛠️ 9. How Do You Install and Wire a DALI Magnetic Track Lighting System?
Electrical work must follow local regulations and the manufacturer’s diagram, and be done by qualified personnel where required.
9.1 Prepare the Track and Compatible Components
Confirm track voltage (here: 48V class systems under discussion), luminaire/driver DALI version, conductor map and the exact feed/adapters for that family.
9.2 Install the Track and 48V Power Feed
Mount the track and connect the 48V power feed according to the manufacturer’s specified polarity or polarity-free input requirements. Respect feed-point and load rules on that sheet. Maytoni Exility materials, for example, mark 48V polarity on the power pair and call for supply reserve capacity.
9.3 Connect the DALI Bus
Land DA/DA per the diagram—four-wire track pair, external feed colours or module contacts. The DALI bus is polarity-independent. For the 48V DC power connection, follow the polarity requirements specified for the particular track, power feed and driver. Some drivers accept polarity-free DC input (for example Sunricher SRP-2305-MT-48VCC100-700 on its product page), but this does not establish polarity independence for the complete system.
9.4 Inspect Electrical Connections Before Power-On
Check terminals, the 48V connection against that product’s polarity or polarity-free rules, DALI continuity, driver ratings and that non-DALI supplies were not substituted where the sheet forbids them (as Maytoni notes for certain recessed PSU SKUs without DALI contacts).
🎯 What needs to be connected when installing a DALI magnetic track system?
The 48V feed per that product’s polarity or polarity-free rules, the DALI bus path per the diagram, and compatible DALI gear—then inspect before energising.
🔍 10. How Do You Commission and Troubleshoot DALI Magnetic Track Lights?
10.1 How Do You Discover and Address DALI Drivers?
Use the project’s commissioning tool to discover gear, assign short addresses and read implemented device types. Save the address map with the as-built drawings.
10.2 How Do You Test Individual and Group Control?
Prove one address, then groups, then scene recall. Wrong group membership looks like a “dead” head when the bus is fine.
10.3 Why Does a DALI Magnetic Track Light Fail to Respond?
| Symptom focus | Likely area | Vérifier |
|---|---|---|
| No light at all | 48V power / feed / PSU | Voltage at feed, product polarity or polarity-free rules, supply rating |
| Powered but mute on bus | Bus power / DA wiring | Bus supply present, DA continuity |
| Wrong or missing in discovery | Addressing / gear type | Re-address; confirm DALI gear SKU |
| Random drop-outs | Bus loading / noise | Current budget, line length, topology |
| Light responds but dimming or colour control is incorrect | Driver configuration / DT6 / DT8 | Verify implemented IEC 62386 Parts, the supported colour type and controller configuration |
Do not blame DALI communication for a dark head that never received 48V.
10.4 Why Does a DALI Magnetic Track Light Fail to Dim Properly?
Mismatch between DT6/DT8 expectations, wrong colour type, LED–driver current mismatch or bad fade parameters are common. Confirm the gear’s Parts list against the controller template.
🎯 What should you check when a DALI magnetic track light does not respond to control commands?
Separate 48V power faults from bus-power, wiring, addressing and DT6/DT8 configuration faults—then test in that order.
🏬 11. How Does DALI Magnetic Track Lighting Improve Commercial Lighting Control?
11.1 Individual Lighting Control in Retail Displays
Addressed heads let merchandisers raise one bay without rebuilding the entire circuit—useful when product density changes weekly.
11.2 Scene-Based Lighting in Museums and Showrooms
Scenes can store repeatable lighting settings for exhibition, event and scheduled operating modes. Where DT8 colour types are specified, colour temperature can join those presets. Scene recall alone does not guarantee conservation lighting compliance.
11.3 Zoned Lighting Control in Hotels and Commercial Interiors
Groups map to zones with different schedules. Central controllers keep the magnetic track layout flexible while control logic stays structured.
These are control advantages—not automatic promises of energy savings, lower maintenance cost or higher sales.
🎯 What practical control advantages does DALI bring to commercial magnetic track lighting projects?
Individual addresses, groups and scenes on compatible gear—when the bus and drivers are specified as one system.
📋 12. What Should You Check Before Specifying DALI Magnetic Track Lights?
12.1 Confirm the Track Voltage and Conductor Configuration
Lock 48V (or the actual system voltage), conductor count/map and whether DALI rides in the track or on external feeds. Confirm that the magnetic track, luminaire adapter, power contacts and feed accessories are mechanically and electrically compatible. Matching voltage or DALI functionality alone does not guarantee cross-brand interchangeability.
12.2 Confirm the DALI Driver and Luminaire Specifications
DT6 vs DT8 (and colour type), input voltage, LED current/power, mechanical interface and driver location.
12.3 Confirm the DALI Bus and Control Requirements
Bus power source, application controller, address/group plan, DALI-2 certificates where the specification requires them, and any BMS gateway.
12.4 Confirm Project Documentation and Testing Requirements
Wiring diagrams, datasheets, IES/LDT files, certifications, commissioning records, spares and maintenance access.
XHLUX fournit des luminaires commerciaux magnetic track platforms and can discuss OEM/ODM driver and module options for project DALI configurations—always against the track family’s wiring diagram, not a generic four-wire assumption.
🎯 What should a buyer or project designer confirm before ordering a DALI magnetic track lighting system?
Voltage and conductors, driver Parts/location, bus power and controller, plus documents and commissioning—before the PO.
FAQ
Conclusion
A dali magnetic track light project succeeds when you treat it as a coordinated system: 48V track power, DALI bus power, the correct DT6/DT8 gear, a proven conductor map and a controller that can commission what you bought.
Four-wire platforms such as Topsund’s M20, in-module drivers such as Sunricher’s magnet-track DT6/DT8 range, and product-specific DALI feeds such as those shown in Maytoni Exility sheets are evidence for those products—not interchangeable industry laws.
Specify the architecture first, then order parts that share one diagram. Contactez-nous with your track layout and control matrix if you need a configuration review for a commercial project.
Explorez nos articles de blog connexes :
