Технические руководства

Low-profile linear LED lighting: what you gain in shallow ceilings—and what you trade off in thermal path, optics and install options.

Linear ceiling lights are not just longer lamps—distribution, fixture design, architectural integration and mount flexibility change the space.

W/m on linear LED fittings shows power per metre—not brightness. Compare lm/m, lm/W, total W and driver load before you treat two W/m lines as equal.

On solid concrete, surface mount linear LED needs a planned feed route—rear, end, conduit or remote driver—not a ceiling void that is not there.

Renderings show design intent; shop drawings show buildable linear LED—joins, hang points, drivers and access. Why they differ and what to check.

White linear lighting can blend better than black on light-coloured commercial ceilings. Compare finish tone, mounting, pendant form and strip vs fixture.

A black suspended linear light does not automatically produce fewer lumens than white. Check if black enters the optical path—or if the SKUs differ inside.

No universal spacing for linear wall sconces in a hallway. Use mounting height, distribution, corridor width and lighting duty—not a fixed metre rule.

Yes—recess, surface and suspended mounts define depth differently. Check recess options, spacing, continuous-run choice and mounting depth before PO.

Learn how to align quote scope, drivers, optics and compliance when hanging LED light bar specs disagree between vendor proposals.

Where to use linear pendant lights in a suspended ceiling layout: set drop below the grid, cable hang points, follow-or-break axes and tile-safe mounts.

How long is too long for one ceiling linear light run? Check spacing, join limits, beam uniformity, mounting before you spec a continuous ceiling line.